Item
Daily
Air Compressors / Bits
Air Bits, Points or Chisels
12.50
Air Bits, Asphalt Cutter – 5″
15.50
Air Hoses, 3/4″ x 50′
11.50
Compressor, 185 CFM – Diesel
187.25 Plus Diesel
Breakers & Drills
Air Paving Breakers 70 or 90 LB.
63.25-68.00
Rivet Buster
Weighs 35 lbs
51.75
Air Rock Drills
Requires 150 CFM of Air
72.00
Electric 68 LB Dewalt With Cart
and 50′ Ext. Cord. Bits Extra
73.32 4 HR 104.75 Day
Vacuum Dust Collection System
We have attachments for our specific models, just hook up to a shop vac to be safe and comply with OSHA Silica Dust Standards
OSHA Silica Overview PDF
Full Guidelines
12.00
Shop Vac, 9 Gallon
32.50
Electric – 40 LB
59.85 4 HR 85.50 Day
Hammers, Demolition & Rotary – electric
46.20 4 HR 66.00 Day
2″, 2 1/2″ & 3″ Core Bits
28.75 to 42.00
Core Drill, Floor Model – Electric
131.75
Core Drill, Hand Held – Electric
73.75
Core Drill Bits, 2″ – 6″
Rental 60.75-123.75
Air Nailers
Nailer, Bostitch N-80 coil framing air gun
38.25
Nailer, Bostitch N-60 stick Finish air gun
38.25
There is a $62.50 charge if you need to rent a trailer with all front end loaders, tractors and large excavators.
Excluded is the mini micro excavator as it can go on a small trailer.
Front End Loaders / Backhoes
Bobcat S530 Skid-Steer Loader
Horsepower: 49 hp
Rated Operating Capacity (SAE): 1,850 lb (839.15 kg)
Operating Weight: 6480 lb (2939 kg)
Auxiliary Std Flow: 17.1 gal/min (64.7 l/min)
Pictures and More Information
289.00 (8 Hours Use)
Plus Diesel,
Deposit on Fuel use
Takeuchi Compact Track Loader
Full cab with AC, heat & radio
Model TL220
Pictures and More Information
386.25 (8 Hours Use)
Plus Diesel,
Deposit on Fuel use
Loader Attachments
(Renting just an attachment? Add $40.75 + Deposit)
With Loader Rental
Hydraulic Breaker Attachment
-Fits BOBCAT & MOST OTHER Skid Steer Loaders
Weight: 550 lbs, Impact energy: 575 ft lbs
510-1,180 blows per minute
54″ long, 2.6″ tool diameter
258.50
Forks, 39″
65.25
Snow Bucket, 66″ Wide 21 Cubic Foot
38.75
Mini Loader
Kanga 725 Mini Loader
>> You Must Call “811” Three Days Before You Dig, It’s The Law!
.-1 Day Allows Up To 8 hours On Meter.
214.00
Cormidi Mini Loader Model C1500
This Machine Weighs 3,307 Lbs With The Bucket, Must Go Out On Tilt Bed
Trailer or Larger, No Landscape Trailers.
Dimensions: Bucket Is 41.3″ Wide, Overall Length Including Bucket Is 112″, Max Height of Bucket Is 88.6″, The Outside Width Of Machine At Tracks Is 35.24″, The Tracks Are 69.7″ Long X 9.06″ Wide, The Minimum Height Of Machine Is 53.94″, The Minimum Length Of Machine From Folded Up Platform To Front Of Machine
Not Including Bucket Is 85.04″, Max Travel Speed Is 4.7 MPH
-Hi Flow Hydraulics Is 13.7 GPM @ 4061 PSI, Standard Hydraulics Is 7.1 GPM @ 2901 PSI
-It Has A 26 HP Tier 4, Kubota Diesel Engine.
-The Loader Is 35.2″ Wide, Bucket Is 41.3″, The Machine From Front of Tracks To Back With Platform Up Is 85.4″.
-Tracks Are 9.1″ Wide X 69.7″ Long.
– Machine Is 54″ High.
>> You Must Call “811” Three Days Before You Dig, It’s The Law!
.-1 Day Allows Up To 8 hours On Meter.
-Machine Shouldn’t Be Used On Over A 15% Angle!
214.00
Mini Skid Steer Attachments
Digga Mini Soil Conditioner – 48″
It fits our Kanga or Cormidi Mini Loaders (and many other brands).
It grades, levels, rakes, and removes debris, pulverizing and preparing the ground for new seedbed or turf. Dethatch or remove old lawn and weeds – All with one tool.
If you only rent the attachment, rent is $26.75 more per day.
149.75
– Hydraulic 4 in 1 bucket
67.75
– Auger attachment
Available bits are: 12″ D x 48 L” or 30″ D x 36″ L
We have a 12″L x 12″D extension that can be used with either size bit.
67.75
– Forks, 38″ L – 650 lb capacity
27.25
Trencher – Digs 6″ wide by 30″ trench
108.25
Excavator
Komatsu Excavator
Digs 9′ 4″, 18″Wide Bucket with Hydraulic Thumb
25.7 Hp Diesel Engine
PDF Brochure
399.00
Plus Fuel
(8 Hours Use)
Compact Micro Excavator
Bobcat E10 Compact Excavator
6′ dig depth
Can drive through a 28″ doorway, Weighs 2,593 LBS
311.25
Plus Fuel
(8 Hours Use)
Kubota Tractor
Kubota Tractor, 39 hp diesel engine
Front bucket is 6′ wide & will lift 2,200 lbs
Backhoe digs 18″w x 10′ deep
It weighs 7,000 lbs
It is 4 wheel drive
1 ton truck required to tow it.
419.50
Plus Fuel
(8 Hours Use)
4 WD Kubota Tractor
Front bucket and backhoe w/Thumb
309.25 Plus Fuel
(8 Hours Use)
Power Rake
Turf Teq 13 HP 48″ Power Rake
– Prepares seed beds and lawns
– Rakes rocks & debris left or right
– Pulverizes and mixes soil
– Repair & renovate lawns without damaging the healthy turf
177.00
Chippers
2″ – 16 HP Tow with 2″ Ball
120.06 4 Hr
171.50 Day
5″ Vermeer Hydraulic Feed Chipper – 25 HP Gas
The smallest machine in the Vermeer brush chipper line, the BC700XL design is based on operator feedback and focuses on productivity advantage and ease of use. The brush chipper features a centrifugal clutch system, 25 hp Kohler EFI engine, bottom feed stop bar and Vermeer-exclusive SmartFeed feed-sensing control system.
179.37 4 Hr
256.25 Day
12″ Vermeer Hydraulic Feed Chipper – 89 HP Gas
This is a Vermeer Chipper, mod# BC1000XL,
It’ll chip 12″ Pine or 10″ Oak.
470.00 Day
Compactors
Compactors, Asphalt & Dirt
65.28 4 Hr 93.25 Day
Compactors, With Water Tank
69.12 4 Hr 98.75 Day
Reversible Plate Compactor
Weights approx. 730 pounds
241.00
Insulation Blower
for Cellulose only
84.50
Rollers
1 1/4 Ton Roller with Trailer
Hydrostatic drive and power steering
187.25
Roller Vibratory 2 Drum
Bomag brand, dual drums 24″ wide 13.8″ diameter
Single lever control. Weight 1279 lbs.
speed without vib 0-1.99- with vib 0-2.80 mph
224.75
Transit, Leveler Only
63.00
Lights
2 – 500 Watt Quartz
38.25
2 – 150 Watt Spots
13.25
Paving Block Cutter
Will cut most paving materials on the market
made from concrete, clay, stone, granite, etc.
Cutting width: 16.1″, Cutting height: 1.2″ to 6.3″
Unit weight: 127 pounds.
44.25
Saws
Saw, Walk Behind 14″ – 16 HP
116.75
Saw, Cut Off – Electric 14″
102.00 + Blades
Saw, Cut Off – Gas 14″
107.00 + Gas
Diamond Blades, 14″
For Gas Saws, Flat Rate
51.75
Cut-n-Break Saw
Husqvarna K 760 gas saw will cut up to 15″ deep,
3″ at a time. Price includes blades.
283.50
protect you from breathing in this dangerous dust.
Vacuum Dust Collection System
We have attachments for our specific models, just hook up to a shop vac to be safe and comply with OSHA Silica Dust Standards
OSHA Silica Overview PDF
Full Guidelines
12.00
Shop Vac, 9 Gallon
32.50
Water tank, Hose 2 Go
A constant pressure water supply unit.
+ $10 deposit on hose adapter
-Recommended with Breakers and Saws to Keep Down Dust!
More Information & Videos
24.00
Shop Vacs
8 Gallon Shop Vac
32.50
– Hepa Filter
22.25
– Disposable Bag Liner
8.00
Staging & Lifts
Boom Lift, 33.5′ Self-Propelled
For transport, the machine is 6’3″ High x 3’7″ Wide x 13′ Long.
The machine weighs 4100, it’ll lift up to 500 lbs in the basket.
It drives at 1 mph, it’ll go up a 31 degree grade.
The basket is 3’7″ x 2’2″.
It’ll run on gas or electricity.
The outriggers down make it 11’8″ square.
The platform will go to 33’6″ High and 18’6″ Out. $406.50 1st Day
1/2 for each additional day ($203.25)
Power Lift
Will get you up to 14′ 3″ plus your own height
96.75
Genie Scissor Lift
+ $150.00 deposit on safety harness
229.00 Day
572.50 Week
1014.00 4 Weeks
Personnel Lift, 16´ – Electric
84.50
Scaffolding – Staging
29″, 48″ and 60″ Widths
Please Call For Pricing
Alum-a-Pole
– Goes up to 30′ high
Please Call For Pricing
Sweepers
48″ Turf Teq – 13 HP
192.00
Trencher
Ground Hog Trencher – Digs 3″ wide x 18″ deep
It’s not Self-Propelled
5.5 hp Honda engine
It weighs 230 lbs
108.33 – 4 Hr
154.75 Day
